Lacquer Formulations

The project began with a methodical literature review to determine the list of possible constituents for both European and Asian lacquers of the 18th century. For European materials, primarily 17th- and 18th-century sources were consulted; however, for Asian techniques, 20th-century texts were relied on in the hope that they accurately describe traditional techniques as practiced in prior centuries. It is worth noting that much of the Asian lacquer used in French furniture was made specifically for export, reflecting techniques that varied from those used for higher quality domestic production. Therefore, modern descriptions of traditional techniques may not be representative of the materials in this study.
A review of available literature enabled the following conclusions:
- Asian lacquers consist largely of the sap from several trees within the Anacardiaceae family that grow throughout a number of specific geographical regions in Asia.
- The traditional lacquer known as urushi in Japan and qi in China is made from the sap of Toxicodendron vernicifluum.
- Vietnamese and Taiwanese lacquer is composed of laccol sap from Toxicodendron succedaneum.
- Burmese and Thai lacquer is composed of thitsiol sap from Gluta usitata.
- The three types of tree sap, composed mainly of substituted catechols that have long unsaturated side chains, are toxic skin irritants.
Contrasting Methods
Some form of pretreatment is required in order to convert the raw tree saps to a material suitable for application. For example, Kurome lacquer, the starting material in many Asian lacquer preparations, is prepared by heating and stirring the tree saps to reduce the initial water content to a low level. The working properties, appearance, and cost of the formulations are modified by adding other organic materials to the Kurome lacquer such as drying oils, persimmon juice, shellac, animal glue, wood oil, benzoin, and starch. Color is imparted by adding mineral and/or organic pigments. Each individual coat of Asian lacquer is cured first at high humidity (activated by a naturally occurring enzyme) followed by air drying. Lacquers on objects are built of multiple layers, often more than twenty.
In contrast, European japanning methods utilize varnishes that are highly complex mixtures of resins and oils, some of which may be present in small amounts. A few such products are resins from trees (colophony, sandarac, hard and soft copals, and elemi) and insects (shellac), along with organic colorants such as dragon's blood and gamboge. The materials are dissolved in an organic solvent and applied to the object, and the dry lacquer layer forms mainly by solvent evaporation, although lacquers with added drying oils require a certain amount of curing before a topcoat can be applied.
Analyzing Asian and European Lacquers
Successful characterization of these lacquers requires an analytical procedure capable of detecting even minor quantities of as many of the constituents as possible. Although separate procedures have been published for gas chromatographic analysis of Asian lacquer and of complex European furniture varnishes, the project sought to develop a single analytical method capable of identifying and differentiating the components of both types of lacquer in one sample. This approach would streamline the analytical process and ensure that a minimum of sample material would efficiently yield a maximum of information.
One factor that limits the number of potential analytical tools for characterizing Asian lacquers is the films’ extreme intractability, making them nearly impossible to dissolve in any type of solvent. Thus, the analysis must be carried out directly on the solid sample material. Pyrolysis-gas chromatography / mass spectrometry using derivatization with tetramethylammonium hydroxide (TMAH-Py-GC/MS) is the primary analytical method used. Heat and the TMAH reagent are used to degrade the intractable lacquer into small marker compounds that are characteristic of the original organic materials.
Presently, this technique requires approximately 50–100 micrograms of sample material for analysis, but the project team is conducting research to reduce the sample requirements. To test smaller samples, Fourier-transform infrared spectrometry (FTIR) is used and identification is done by matching the unknown spectrum to reference spectra of known materials.