Note: To protect the privacy of our members, e-mail addresses have been removed from the archived messages. As a result, some links may be broken.

Find Lesson Plans on getty.edu! GettyGames

Re:[teacherartexchange] teacherartexchange digest: October 13, 2006

---------

lpapanicolaou_at_TeacherArtExchange
Date: Mon Oct 16 2006 - 07:10:15 PDT


This sound s like a lot of work and obviously the PTO wanted the ornaments glazed on back. Just tell the PTO they have to buy you stilts to fire them.

Linda

---- Original message ----
>Date: Sat, 14 Oct 2006 06:01:08 -0700
>From: Julie Tonkovich <jatcagirl7@adelphia.net>
>Subject: Re:[teacherartexchange] teacherartexchange digest: October 13, 2006
>To: "TeacherArtExchange Discussion Group" <teacherartexchange@lists.pub.getty.edu>
>
>you could also ask the PTO to get a very wet sponge and carefully
>clean all the glaze off the bottom of the ornaments and 1/4-inch up
>on the sides (up from the bottom), and then take a needle tool and
>shave the sides to a thinner coating of glaze (to avoid drips onto
>kiln shelf.) the needle tool can also help scrape off the 1/4-inch
>side edge glaze line. a good coat of kiln wash on your shelves will
>allow you to pull off any ornaments that stick...
>
>
>> Subject: RE: teacherartexchange digest: October 12, 2006
>> From: "carl toonz" <carltoonz@hotmail.com>
>> Date: Fri, 13 Oct 2006 12:06:42 +0000
>> X-Message-Number: 2
>>
>> Hello everone! I hope your school year has been great so far!
>> I need some technical advice oin firing clay ornaments. It seems our
>> schools PTO has been making Christmas ornaments for sale at our
>> annual country fair. They have glazed them all around (all sides).
>> How can
>> I fire them with out damaging my kiln, shelves, etc.,?
>> I would appreciate your answers.
>
>---
>To unsubscribe go to
>http://www.getty.edu/education/teacherartexchange/unsubscribe.html

---
To unsubscribe go to 
http://www.getty.edu/education/teacherartexchange/unsubscribe.html