Note: To protect the privacy of our members, e-mail addresses have been removed from the archived messages. As a result, some links may be broken.

Find Lesson Plans on getty.edu! GettyGames

Re: [teacherartexchange] ceramics question

---------

From: Rebecca Burch (mamallama_at_TeacherArtExchange)
Date: Mon Jun 25 2007 - 16:11:08 PDT


They are high-fire stoneware, life is good. :)

Thanks for the info, Marvin! I think I will go ahead and seal them
anyway, after the grout has had time to dry well.

On 6/25/07, Marvin Bartel <marvinpb@goshen.edu> wrote:
> >Okay, I have some tiles that students made that are going to be put
> >onto metal posts, outdoors. I have the correct adhesive, but I want
> >to know if I need to seal the tiles or just grout them? They will be
> >in the weather, but can be covered up during the freezing temps.
> >
> >Thanks
> >Becky
>
> It depends on the tile. High-fire tile is better outdoors in freezing climates because high-fire clay is less apt to absorb moisture. Low-fire tile absorbs moisture in the rain. High-fire is cone 6 to 10 (stoneware and porcelain). Low-fire is cone 010 to 04 (earthenware). If it has not had a chance to dry out after a rain before it freezes, the freezing can break or even pulverize the clay because water expands when it freezes. Using a waterproof sealer could help if it is totally dry prior to application of the sealer. The grout for any outdoor tile should be sealed after it has dried a few weeks. If they are low fire tile, perhaps the whole tile could be soaked in sealer and allowed to dry before installation.
>
> Marvin
>
>
>
> ---
> To unsubscribe go to
> http://www.getty.edu/education/teacherartexchange/unsubscribe.html
>

---
To unsubscribe go to 
http://www.getty.edu/education/teacherartexchange/unsubscribe.html