Note: To protect the privacy of our members, e-mail addresses have been removed from the archived messages. As a result, some links may be broken.
<< I didn't see any pegs for them to fit onto the
wheels. The wheels have some old clay in the peg holes, so...I'm
wondering, are the pegs hidden? Should I just use some clay slip and
attempt to attach the boards to the wheels that way? I know we used to do
it that way with plaster bats.
Larry, you will need to buy bolts and nuts to fit into the holes in your
wheel heads -
I discovered we have one portable plaster filled table, about 20" by 40" to
wedge clay on, but the plaster is all cracked, and chips come out in the
clay. I've never done this before, but should I break up all the plaster,
empty the frame out and attempt to mix up and fill it with new plaster? IF
so, I'd appreciate some advice on that! Is this a special kind of plaster?
You will need to break out some of the plaster to fill the table with a new
layer of plaster. Yes, it is a special plaster. Contact your local pottery
--- You are currently subscribed to artsednet as: hm-aen.edu To unsubscribe send a blank email to leave-artsednet-4261K